Composite vs wood: what actually separates the materials
The choice is rarely "which board is best". It is which trade-off you want to live with: the upfront price, the weekends you spend on upkeep, how the surface feels barefoot in August, or how much written warranty backs the boards. The selector above weights those qualities the way you do.
How the material scores work
- Rate the qualities. Each material carries a 0–10 rating for cost, upkeep, lifespan, warranty, heat, feel, and pet-and-kid wear. Ten is always the friendlier answer for a homeowner.
- Set your weights. The four project questions multiply the weight of the qualities they touch. A value-minded, full-sun, low-maintenance project pushes cost, upkeep, and heat to the front.
- Read the weighted average. Your match percentage is the weighted average of the seven ratings — not a grade, and not a measure of craftsmanship.
- Check the trade-offs. Every pick shows the qualities that lifted it and the ones counting against it, so you can see what you are giving up before you commit.
The seven qualities in plain terms
- Upfront cost
- How much does the decking cost to buy and install? High score: lower installed cost. Low score: higher installed cost.
- Low maintenance
- How little cleaning, sealing, or staining does it need? High score: almost no routine care. Low score: frequent care needed.
- Lifespan
- How long does the surface hold up before replacement? High score: longest service life. Low score: shortest service life.
- Warranty coverage
- How strong is the manufacturer warranty behind the boards? High score: longest written coverage. Low score: little or no material coverage.
- Cool underfoot
- How comfortable is the surface in direct summer sun? High score: stays coolest barefoot. Low score: gets hottest barefoot.
- Surface feel
- How does it feel and look up close - grain, texture, splinters? High score: natural, splinter-free feel. Low score: synthetic or splinter-prone.
- Pets and kids
- How well does it shrug off claws, spills, and heavy traffic? High score: handles rough use best. Low score: shows wear soonest.
Decking materials at a glance
Bundled guidance dated 2026-09-01. Decking material plus installation, consistent with the Deck Cost Calculator.| Material | Cost band | Per sq ft | Typical lifespan | Best for |
|---|
| Pressure-treated woodSoftwood | $Cost band 1 of 4 | $20-$24 per sq ft | Roughly 15-25 years when it is sealed on schedule | The tightest budget, a rental, or a deck you plan to replace later. |
|---|
| CedarSoftwood | $$Cost band 2 of 4 | $27-$33 per sq ft | Roughly 15-25 years with periodic staining | Homeowners who want a natural look and will keep up with staining. |
|---|
| Trex compositeCapped composite | $$$Cost band 3 of 4 | $36-$45 per sq ft | Roughly 25-30 years of residential use | A no-staining deck that still reads as wood. |
|---|
| TimberTech compositeCapped composite | $$$Cost band 3 of 4 | $38-$48 per sq ft | Roughly 25-30 years of residential use | Buyers who want composite looks with the strongest written coverage available here. |
|---|
| Fiberon PVCCapped PVC | $$$$Cost band 4 of 4 | $42-$52 per sq ft | Roughly 30 years and up | Full-sun, wet, or high-traffic decks where nothing should ever need refinishing. |
|---|
| Ipe hardwoodTropical hardwood | $$$$Cost band 4 of 4 | $55-$72 per sq ft | 30-40 years and often longer with care | A lifetime deck where cost matters less than permanence and density. |
|---|
| Tigerwood hardwoodTropical hardwood | $$$$Cost band 4 of 4 | $52-$66 per sq ft | 25-40 years with oiling | A statement deck where the grain pattern itself is the design feature. |
|---|
Upkeep, warranty, and surface notes
Pressure-treated wood
- Upkeep: Clean and seal about every other year; boards can cup, crack, and splinter as they age.
- Warranty: Limited treater warranty on the lumber brand plus the 5-year Deck Bros workmanship warranty.
- Heat: Stays noticeably cooler than composite or PVC in direct sun, especially in a light color.
- Feel: Real wood grain, but the roughest surface here - knots, checks, and the odd splinter.
- Pets and kids: Claws and traffic mark softwood fastest; splinters are the main worry with dogs and bare feet.
- Watch out: Deferred sealing is what actually shortens a treated deck's life.
Cedar
- Upkeep: Needs cleaning and staining every couple of years to hold its color; silvering is normal if you skip it.
- Warranty: Natural wood carries no meaningful manufacturer finish warranty; the 5-year Deck Bros workmanship warranty still applies.
- Heat: The coolest surface in this comparison - the best pick if barefoot comfort in full sun is the priority.
- Feel: Warm, natural grain that is comfortable underfoot and easy to repair board by board.
- Pets and kids: Softer than composite or hardwood, so claws and furniture leave marks; still splinter-prone.
- Watch out: Cedar is a maintenance commitment, not a low-maintenance pick.
Trex composite
- Upkeep: Soap and water a couple of times a year. No staining, sealing, or painting.
- Warranty: Typically a 25-year limited manufacturer warranty on the boards, plus the 5-year Deck Bros workmanship warranty.
- Heat: Capped boards hold more heat than wood in direct sun; a lighter color helps a lot.
- Feel: Consistent, splinter-free surface with a woodgrain emboss. Feels warmer and slightly softer than PVC.
- Pets and kids: Handles spills and traffic well; heavy claws can still leave surface scratches on some colors.
- Watch out: Dark colors and full sun are the worst combination for heat build-up.
TimberTech composite
- Upkeep: Soap and water a couple of times a year. No staining, sealing, or painting.
- Warranty: Deck Bros is a TimberTech Platinum Contractor, which adds 5-7 years of replacement labor warranty beyond the 25-year product warranty. The 5-year workmanship warranty also applies.
- Heat: Capped boards run hot in direct sun, similar to other composites; lighter colors stay cooler.
- Feel: Splinter-free with a deep, low-glare woodgrain finish and several matte color options.
- Pets and kids: Comfortable for paws and good with spills; sharp claws can still scuff the cap over time.
- Watch out: The labor-warranty advantage only holds while Platinum status is maintained.
Fiberon PVC
- Upkeep: The least maintenance of any option: rinse and occasionally wash. No staining ever.
- Warranty: PVC lines typically carry a limited-lifetime or long limited manufacturer warranty; the 5-year Deck Bros workmanship warranty also applies.
- Heat: Dense and fully synthetic, so it holds the most heat of the capped boards in full sun.
- Feel: Smooth, uniform, and splinter-free, but it can feel slick when wet and reads less like wood.
- Pets and kids: The most moisture- and stain-resistant surface here, which matters for dogs, pools, and spills.
- Watch out: Highest cost, hottest surface, and the least natural look of the group.
Ipe hardwood
- Upkeep: Oiling about once a year keeps the rich color; left alone it weathers to a silver-grey patina.
- Warranty: No meaningful manufacturer finish warranty on natural hardwood; the 5-year Deck Bros workmanship warranty applies.
- Heat: Very dense, so it absorbs and holds heat - one of the hottest surfaces barefoot in direct sun.
- Feel: Extremely hard, tight-grained, and smooth. Feels the most solid of anything here.
- Pets and kids: Hard enough to resist claw marks, but the dense surface gets hot for paws in full sun.
- Watch out: Heavy, hard to cut, needs pre-drilling, and requires annual oiling to stay dark.
Tigerwood hardwood
- Upkeep: Annual oiling to hold the striped color; without it the surface fades to a soft tan.
- Warranty: No meaningful manufacturer finish warranty on natural hardwood; the 5-year Deck Bros workmanship warranty applies.
- Heat: Dense hardwood that gets hot in direct sun, though a little less than ipe.
- Feel: Distinctive light-and-dark striping with a hard, smooth, furniture-like finish.
- Pets and kids: Hard enough to take claw traffic well; heat, not scratching, is the usual complaint.
- Watch out: The look depends on staying on top of oiling, and board supply varies.
Two examples
Full-sun family deck with dogs
Full sun, a tight budget, as little upkeep as possible, and dogs in the yard. Cost, upkeep, heat, and wear all carry extra weight, and a capped composite board usually comes out ahead of wood because it never needs staining. The trade-off is a hotter surface than cedar in the afternoon and a higher upfront price. A lighter board color and a shaded stair landing are the usual fixes.
Shaded, adults-only deck where the finish matters
Mostly shaded, no pets, budget for the long run, and no objection to oiling. Heat stops mattering, lifespan and warranty climb, and TimberTech, Trex, or an oiled hardwood move to the top. If you want the longest service life on the list and will keep up with annual oiling, ipe is the density winner; if you want the strongest written coverage, Deck Bros installs TimberTech as a Platinum Contractor.
Deck material questions homeowners ask
Is composite better than wood?
Not universally. Composite and PVC cost more upfront but skip the annual staining and carry long manufacturer warranties. Wood costs less up front and stays cooler underfoot, but it needs sealing every couple of years. Which one "wins" depends on how you weight cost, upkeep, heat, and warranty — which is exactly what the selector above does.
Why did the tool rank a material I did not expect?
Because the score follows your weights, not a fixed order. Raise the weight on heat or lower the weight on upfront cost and the list will change. Move a slider back and the ranking returns — nothing is saved.
Does a lower match score mean a bad material?
No. It means the material does not line up with the priorities you set. Cedar scores low on a low-maintenance project and high on a barefoot-comfort project; both are correct answers to different questions.
Where do the warranty numbers come from?
From what Deck Bros publishes: a 5-year workmanship warranty on every build, limited-to-lifetime manufacturer warranties on capped composite, and 5–7 extra years of replacement labor warranty through TimberTech Platinum certification, on top of the 25-year product warranty. Notes are dated 2026-09-01 and terms change, so confirm the current warranty with the manufacturer.
Can I use this for a deck repair or a re-deck?
It ranks decking surfaces for a new deck or a full re-deck. If your frame, posts, and footings are sound, resurfacing costs far less than a ground-up build — ask Deck Bros for a deck installation assessment instead, and use the Deck Cost Calculator for a budget range.
See and feel the boards in person
Deck Bros is a family-owned Omaha deck builder and a certified TimberTech Platinum Contractor. Deck design visits include material samples, every build carries a 5-year workmanship warranty, and permits are handled for you.
Book A ConsultationEstimate the cost of your deck
Deck Material Selector · preference-based guidance, not a quote · material notes dated 2026-09-01. © 2026 Deck Bros.