Free planning tool · no account needed

Deck Cost Calculator

Estimate what a new deck will cost in Omaha, Lincoln, and nearby Nebraska and Western Iowa communities. Enter your deck size, decking material, railing, stairs, and how far the deck sits above grade, and you get a ballpark budget range, a cost per square foot, and a line-by-line breakdown you can copy or download.

  • The math runs in your browser
  • Nothing you type is uploaded or stored
  • Ballpark planning range, never a quote
Deck size

Most residential decks land between 6 and 40 ft on each side.

Decking material
  • Pressure-treated woodLowest upfront cost; plan on cleaning and sealing every other year.
  • CedarNatural wood look that stays cooler underfoot; needs periodic staining.
  • Composite (Trex, TimberTech, Fiberon)Capped boards with limited-lifetime manufacturer warranties and no annual staining.
  • PVCFully synthetic boards for the most moisture- and insect-resistant finish.
Railing, stairs, and height

Use 0 steps for a deck at door level. Height above grade changes how tall the posts and footings have to be.

Your ballpark estimate

Price guidance dated 2026-09-01

Fill in the deck details and choose Estimate deck cost to see a low-to-high budget range, the cost per square foot, and the breakdown behind the number.

How the deck cost estimate works

  1. Measure the deck. Width is the side that runs along your house; depth is how far the deck extends away from it. The two numbers multiply into the deck area in square feet.
  2. Pick the decking. Pressure-treated wood is the lowest upfront cost, cedar sits in the middle, and capped composite or PVC boards cost more but skip the annual staining.
  3. Choose the railing. Railing is priced per linear foot along the two sides and the outer edge — the fourth edge is your house wall.
  4. Add stairs and height. Each step is priced individually, and a taller deck needs longer posts, deeper footings, and more bracing, so the framing line grows.
  5. Read the range. The low end assumes straightforward site access and standard details. The high end leaves room for the conditions that show up on real projects.

What the estimate includes — and what it leaves out

Included in the number

  • Footings, posts, beams, joists, and the picture-frame border
  • Decking material plus installation
  • Railing material plus installation, measured per linear foot
  • Stair stringers, treads, and handrail per step
  • An elevated-height adjustment on the framing line

Not included

  • Permits, engineering letters, and HOA review
  • Tearing out and hauling away an existing deck
  • Fascia wrapping, lighting, fans, fire pits, and privacy screens
  • Slope, soil, drainage, or tight-access complications
  • Furniture, planters, and other finishing touches

Worked examples

12 × 12 ft cedar deck

A 144 sq ft cedar deck with wood railing and three steps lands in the low-to-mid teens. Cedar needs cleaning and staining roughly every other year, which is part of why the long-run cost gap with composite narrows.

20 × 12 ft composite deck with aluminum railing

A 240 sq ft composite deck with 44 linear ft of aluminum railing and three steps lands in the mid-to-high twenties. Capped composite carries a limited-lifetime manufacturer warranty and needs no annual staining.

Resurfacing an existing frame

If your frame, posts, and footings are sound, replacing only the decking costs far less than a ground-up build. Deck Bros publishes basic deck installation from $9.74 to $12.43 per sq ft, and this calculator is not built for that case — ask for a deck installation estimate instead.

Deck cost questions homeowners ask

Is this deck cost calculator a quote?

No. It is a ballpark planning range from published local price guidance, and every number stays in your browser. A real Deck Bros quote is fixed per project and follows a free on-site or phone consultation.

Why does the estimate come back as a range?

Two decks with the same dimensions can differ in footing depth, post height, site access, and detail work. The low end reflects simple conditions and the high end leaves room for the rest, so you can plan a budget without treating one number as final.

Does composite really cost more than wood?

Upfront, yes — composite decking runs higher per square foot than pressure-treated wood. Over time the gap narrows, because wood decks need cleaning and sealing every other year while capped composite boards carry limited-lifetime manufacturer warranties.

How accurate is the cost per square foot figure?

It is your estimated total divided by the deck area you entered. It is useful for comparing two versions of your own plan, but it is not a market benchmark: a small deck with stairs and railing will always show a higher cost per square foot than a large simple one.

Can I save the estimate?

Yes — use Copy summary to paste it into an email or note, or Download CSV to open the breakdown in a spreadsheet. Nothing is saved to this site, so download or copy before you close the tab.

Turn the ballpark into a fixed price

Deck Bros is a family-owned Omaha deck builder. Estimates are free, many can be handled same-day over the phone, and every build carries a 5-year workmanship warranty with permits handled for you.

Get Your QuoteSee what a Deck Bros build includes

Deck Cost Calculator · planning estimate only · price guidance dated 2026-09-01. © 2026 Deck Bros.