Where the Money Goes: A Cost Breakdown
A composite deck installation involves several distinct cost categories. Quotes that look dramatically different often differ in what they include. When you request a quote, ask for a line-item breakdown covering each of these components.
| Cost Component | Typical Range | Notes |
|---|---|---|
| Composite decking boards | $8–$22 per sq ft | Materials only; spans entry-level to premium (Trex, TimberTech, Fiberon) |
| Substructure / framing | $2–$8 per sq ft | Pressure-treated joists, beams, and ledger board |
| Labor (installation) | $8–$25 per sq ft | Varies significantly by region and project complexity |
| Fasteners and hardware | $1–$3 per sq ft | Hidden fastener systems deliver a cleaner finished look |
| Demo and removal | $500–$2,500+ | Flat fee depending on size and disposal costs |
| Railing system | $35–$120 per linear ft | Composite, aluminum, and cable rail systems vary widely |
| Stair sections | $700–$2,500+ | Each stair run is priced separately based on complexity |
| Permit and inspections | $100–$500+ | Required in most jurisdictions; cost varies by municipality |
*Published per-square-foot estimates reflect market averages and can shift based on local labor and site conditions.*
What a Composite Deck Costs at Common Sizes
Deck size is the single biggest driver of total project cost. The table below shows fully installed cost ranges at three common deck sizes, using mid-range composite boards and standard labor.
| Deck Size | Square Footage | Estimated Fully Installed Range | Notes |
|---|---|---|---|
| 10 × 12 ft | 120 sq ft | $6,000 – $15,000 | Entry-level composite, ground-level, no stairs |
| 16 × 20 ft | 320 sq ft | $15,000 – $35,000 | Mid-range composite, single stair section, standard railing |
| 20 × 24 ft | 480 sq ft | $22,000 – $50,000+ | Premium composite, multi-level/elevated, full railing perimeter |
*These ranges are for planning purposes and are not specific quotes. Actual costs depend on material selection and site conditions.*
Five Things That Raise (or Lower) Your Installation Cost
Two decks with the same square footage can end up at very different final prices. Here are the project conditions that have the largest impact on what you'll be quoted.
1. Ground Conditions
Soft soil, sloped yards, or high water tables require deeper footings. An elevated deck on a hillside costs more than a ground-level deck on firm ground.
2. Stairs & Multi-Levels
Each stair section adds $700–$2,500+. Multi-level designs add thousands to the base cost before any premium material choices.
3. Railing Style
A basic composite rail is significantly less expensive than glass or cable systems. Rail cost alone can range from $2,000 to $6,000 for a standard 16x20 deck.
4. Existing Frame
If re-decking, rotted or undersized joists must be replaced. Extensive repairs can make the cost approach that of a full new build.
5. Old Deck Removal
Tearing out and hauling away typically adds $500–$2,500. Composite materials are heavier and can cost more to dispose of.

Questions to Ask Your Contractor Before You Sign
- Is this quote fully installed, or does it cover materials only?
- Are permits and inspections included in this price?
- Does this price include old deck demolition and removal?
- What composite brand and product line is specified?
- Is the framing pressure-treated for ground contact?
- What fastener system is used—face-screwing or clips?
- Is the contractor licensed, bonded, and insured?
Trusted by Industry Leaders





Get a Detailed, Line-Item Quote From Deck Bros
Deck Bros has built over 2,500 decks. As TimberTech Platinum Contractors with 30+ years of experience, we provide complete itemized proposals so you know exactly what you're paying for.
- Itemized Material Breakdown
- Permit & Inspection Management
- 3-Day Build Average


